glass temperature meaning in Chinese
玻璃化转变温度
玻璃化温度
玻璃态化温度
Examples
- Homogeneous bridging groups always raise the glass temperature .
同类桥联基因总是提高玻璃化温度。 - Heterogeneous bridging groups can raise the glass temperature according to their chemical composition .
不同类桥联基团根据它们的化学组成能提高玻璃化温度。 - By using the air temperature measured by thermocouples and the glass temperature measured by infrared thermometer as the training sample , a model for prediction of the temperature parameters for the float glass in lehr was created based on the ameliorated bp neural network
摘要利用热电偶测得的退火窑中空气温度和红外测温仪测得的玻璃表面温度作为训练样本，建立了基于bp神经网络的玻璃温度预测模型。 - Abstract : based on the research of the three - dimensional models of glass batch , molten glass flow and heat transfer within glass furnaces , the result of graphic simulation of temperature and velocity fields are given . by comparison with the erosion refractory photos in the cold state of 300 t / d float furnace of hangzhou float glass industry ltd . , the reliability of the models is proved . at the same time , the effect of glass temperature and velocity fields distribution on erosion of refractory with in float glass furnace are discussed
文摘:通过对窑内配合料及玻璃液流运动和传热的三维数学模型研究，对玻璃液温度场和流场进行了图形模拟，将模拟结果与杭州浮法玻璃工业有限公司300吨级浮法窑冷修时所拍摄的各部位耐火材料被侵蚀情况照片进行了比较、分析，验证了模型的可靠性，并分析耐火材料的被侵蚀与玻璃液温度场和流场分布的影响。 - The obtained polysilane - polyacrylate gradient films showed no macro - interface with the silicone content reducing gradually from the top surface to the bottom one . dma thermograms indicated that polysilane - polyacrylate gradient films contained two glass temperatures with their bands drifting from and their range extending much from each component . the good properties of waterproof , calorifics , and ultraviolet - absorption were also determined by dsc , uv and water contact angle measurements
结果表明：有机硅聚合物-聚丙烯酸酯梯度膜有一个较宽的玻璃化转变温区，玻璃化转变范围相对组分材料的玻璃化转变范围发生了扩展：有机硅聚合物-聚甲基丙烯酸酯梯度膜具有较好的热学性能；硅含量的提高有利于改善膜层的憎水性能和紫外吸收性能。